In a world of strange things in the sky and mobile connectivity around the globe.
Just like the influence of narcotics in combination with technology and soul.
Fighting sleep disorder for 15 years, as the source is not known.
I recorded with the HackRF One A moment at the window of our master bedroom.
During the day. As the nights provide more trouble then progress.
If you're in some struggle with technology around your soul, maybe this helps or not?
It worked for me. After 15 years of spiritual terror.
Around me a lot of antenna’s with no clear purpose? there many more sides. see photo.
Instructions:
You need a HackRFone SDR board to replay this recording. You will find it online.
A computer with a hackRF one driver installed(I use Linux) and the performance to send 40MB/s towards the HackRF one device.
DragonOS – Software Defined Radios
DragonOS - Browse Files at SourceForge.net
VM Ware virtual machine download :
crtl alt go back from virtualmachine to host(your pc). If not asked, right low corner icons. Connect your hackrf device.
You need VM workstation.
Open virtual machine browse to the directory you unzipped your download.
open qtterminal -> icon in the taskbar.
in the terminal use the command ./1.sh
Please take the law into consideration when broadcasting!
UPDATE :
Created A loop script in 4 stages. After you download, make sure you sudo chmod 777 *.sh. So you can use it.
It starts 20 40 80 400-410 11 with 40sec delay between. So we need just one device. You start ./1.sh as first. All content in the same directory.
Life is Life na nanana!!!!
-------------
added to script
___________________________________________________________
Update ham channels 400-410MHz
hackrf_transfer -t hammy -a 1 -p 1 -f 400000000 -x 47 -s 10000000 -R
________________________________________________
hackrf_transfer -t hammy -a 1 -p 1 -f 39000000 -x 47 -s 2000000 -R
( Please consider broadcast power, as example is to powerfull for long term use! )
--------------------------------------------------------
hackrf_transfer -t ham-80 -a 1 -p 1 -f 79000000 -x 47 -s 2000000 -R
( Please consider broadcast power, as example is to powerfull for long term use! )
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------
hackrf_transfer -t ham-20 -a 1 -p 1 -f 19000000 -x 47 -s 2000000 -R
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
hackrf_transfer -t weird-signal -a 1 -p 1 -f 19000000 -x 47 -s 20000000 -R
19MHz start 20HMz up.
---------------------------------------------------------------------------------------------
Only use this in the final hour of the night, towards the first hour of daylight(sunrise time). Not longer. Especially not the entire day or night!!! About 2 hours total.
You can download the file to transmit here.( test-400-420-day )
Changed wires version to compare test-400-420-day-changed-wires
U can use this command to transmit the data from your HackRF one board.
hackrf_transfer -t test-400-420-day -a 1 -p 1 -f 400000000 -x 47 -s 20000000 -R
Transmit power is on max in this example. You can change it, if you are not sure about its range or your surroundings. -x 47 is the max gain for the HackRF one(30mw). Lower that value to limit its range. And change -a 1 to -a 0. That will turn off the amplifier built in.
To time start and stop of this broadcast see files below.
Add on top
sleep 120m
This will let it wait for 2 hours before it starts broadcasting. stop will be 2 hours later then start.
Or use crontab(Linux) to schedule if needed.
Only use this in the final hour of the night, towards the first hour of daylight(sunrise time). Not longer. Especially not the entire day or night!!! About 2 hours total.